Duplex S31803 Stainless Steel Cold Drawn Steel Bar With En 1.4462
2205 Duplex Overview
Duplex 2205 is a nitrogen enhanced duplex stainless steel that was
developed to combat
common corrosion problems encountered with the 300 series stainless
describes a family of stainless steels that are neither fully
austenitic, like 304 stainless, nor
purely ferritic, like 430 stainless. The structure of 2205 duplex
stainless steel consists of
austenite pools surrounded by a continuous ferrite phase. In the
annealed condition, 2205
contains approximately 40-50% ferrite. Often referred to as the
work horse grade, 2205 is
the most widely used grade in the duplex family of stainless
The advantage of a duplex structure is that it combines the
favorable qualities of a ferritic
alloy (stress corrosion cracking resistance and high strength) with
those of an austenitic alloy
(ease of fabrication and corrosion resistance).
Usage of 2205 Duplex stainless steel should be limited to
temperatures below 600° F.
Extended elevated temperature exposure can embrittle 2205
2205 duplex stainless steel is a cost effective solution for many
applications where the 300
series stainless steels are susceptible to chloride stress
corrosion cracking. Stress corrosion
cracking occurs when stainless steels are subjected to tensile
stress, while in contact with
solutions containing chlorides. Increasing temperatures also
increase the susceptibility of
stainless steels to stress corrosion cracking.
The combination of chromium, molybdenum and nitrogen convey the
good resistance of 2205
to chloride pitting and crevice corrosion. This resistance is
extremely important for services
such as marine environments, brackish water, bleaching operations,
closed loop water systems
and some food processing applications. The high chromium,
molybdenum and nitrogen contents
of 2205 provide corrosion resistance superior to common stainless
steels, such as, 316L and 317L
in most environments.
Chemical Composition, %
In what applications is Duplex 2205 used?
- Chemical process vessels, piping and heat exchangers
- Pulp mill digesters, bleach washers, chip pre-steaming vessels
- Food processing equipment
- Oil field piping and heat exchangers
- Flue gas desulfurization equipment
Flanges, Fittings & Valves
Specified Tensile Properties ASTM A240
Ultimate Tensile Strength, ksi Minimum
.2% Yield Strength, ksi Minimum
31 Rockwell C
1) Size and type:
Hexagon Bolt: M6-M64 full thread or half thread
Hexagon Nut: M3-M64
And heavy hex bolts and nuts with all sizes
2) Treatment: cold forging
1. Materials option: Stainless Steel C276, 904L, 304, 304L, 310S,
316, 316L, 321, 317L, 2507,
2205, 254SMO, AL6XN, 1. 4501, 1. 4529.
Super duplex stainless steel F55, F51, F53 HastelloyB & C,
Inconel, Incoloy etc.
2. Standards: GB, DIN, JIS, AISI/ASTM/ANSI/AMSE and BS EN, etc.
3. Packing: Cartons then pallet, or wooden box, or by clients'
4. Exported countries: United States, Germany, Saudi Arabia, South
5. factory price, accept small order and short delivery time1