Hastelloy C2000 Annealed Coil Thk0.25-3mm ASTM B575 Hastelloy c2000
Available in any of the 'profile options'
This alloy was developed to broaden the application range of one
alloy. With the addition of Copper to the
Nickel-Chromium-Molybdenum system, Hastelloy C-2000 is resistant to
an extensive range of corrosive chemicals, including sulphuric,
hydrochloric and hydrofluoric acids. The combination of Molybdenum
and Copper provide excellent corrosion resistance to reducing
media, while the high Chromium content gives good oxidising
|Chemical Composition||Specifications||Designations||Key Features||Typical Applications|
|Element||Min %||Max %|
|Developed to resist corrosion in a wider range of media|
Resistant to an extensive range of corrosive chemicals including
sulphuric, hydrochloric & hydrofluoric acids
Superior pitting resistance and crevice corrosion resistance to
Excellent corrosion resistance to reducing media
Good oxidising resistance
|Density||8.5 g/cm³||0.307 lb/in³|
|Coefficient of Expansion||12.4 μm/m °C (20 – 100°C)||6.9 x 10-6 in/in °F (70 – 212°F)|
|Modulus of Rigidity||79 kN/mm²||11458 ksi|
|Modulus of Elasticity||206 kN/mm²||29878 ksi|
|Heat Treatment of Finished Parts|
|Condition as supplied by Alloy Wire||Type||Temperature||Time (Hr)||Cooling|
|Annealed or Spring Temper||Stress Relieve||400 – 450||750 – 840||2||Air|
|Condition||Approx. tensile strength||Approx. operating temperature|
|Annealed||700 – 1000||102 – 145||-200 to +400||-330 to +750|
|Spring Temper||1300 – 1600||189 – 232||-200 to +400||-330 to +750|
The above tensile strength ranges are typical. If you require
different please ask.
Common Trade Names: Hastelloy C-2000, Alloy C-2000.
Hastelloy C-2000 UNS N06200, Mostversatile, corrosion resistant
alloy with excellent resistance touniform corrosion in oxidizing or
reducing environments. Excellentresistance to stress corrosion
cracking and superior resistance tolocalized corrosion as compared
to C-276 alloy.
The nickel-chromium-molybdenum(Ni-Cr-Mo) C-type alloys have a long
history of use in the ChemicalProcess Industries and are known for
their versatility. Not only do theyresist all acids (especially
hydrochloric, sulfuric, and hydrofluoric)over large temperature
ranges, but they also resist the insidious typesof attack induced
by chlorides and other halide solutions, specificallypitting,
crevice attack, and stress corrosion cracking.
Hastelloy C-2000 Alloy is designated as UNS N06200
Rod, Bar, Wire and Forging Stock: ASTM B 462 (Rod, Bar and Forging
Stock), ASTM B 564 & ASME SB 564 (Forgings), ASTM B 574 &
ASME SB 574 (Rod, Bar and Wire).
Plate, Sheet and Strip: - ASTM B 575; ASME SB 575.
Pipe and Tube: - ASTM B 619; ASME SB 619 (Welded Pipe); ASTM B 622;
ASME SB 622 (Seamless Pipe); ASTM B626; ASME SB626 (Welded Tube).
Other Product Forms: - ASTM B 366 & ASME SB-366 (Fittings).
Trademark Notice: Some names are trade names and/or trademarks of
specific manufacturers. American Special Metals, Corp. is not
affiliated with any manufacturer(s). Orders will be filled to meet
specifications from any available source(s). Names are listed
solely for reference to help identify products consistent with
Limiting Chemical Composition, %
Nickel ………………59 Balance
Cobalt ………………2 max
Molybdenum …….. 16
Iron ………………….3 max.
Manganese ………..0.5 max.
Aluminum ………….0.5 max.
Silicon ………………0.08 max.
Carbon ………………0.01 max.