Hot Rolled 304 Stainless Steel Plate 3.0 - 16.0mm SS Plate EN 10088
1.4319 Stainless Steel
|301 stainless steel plate|
|MTC according to EN 10204-3.1|
Cold rolled sheet
Thickness: 0.4 - 2.5mm
Hot Rolled plate:
Thickness: 3.0 - 16.0mm
Size: 1500 x 6000mm
Hot Rolled: No.1
Cold Rolled: 2B,
T/T, L/C at sight, Western Union,etc.
5-8 days after receive the deposit.
Water proof film coated, standard export package or as required.
Port of shipment
|201, 202, 301, 302, 304, 304L, 316, 316L, 310S, 310,405, 409, 430,
410, 420, 440A,904l, etc|
Stainless steel grade 301 is usually supplied in the form of strips
and wires, with a tensile strength of up to 1800 Mpa, to produce
tempers ranging from 1/16 Hard to Full Hard. By subjecting grade
301 to controlled analysis it is capable of retaining sufficient
ductility even in ½ hard conditions. This form of grade 301 may be
used in aircraft, rail car components and architectural structures.
Tempers of this grade, ranging from ¾ to full hard, may be used in
applications requiring high wear resistance and spring features
with simple form designs.
Grade 301L, which is the low carbon form of grade 301, is the ideal
choice for applications that require good ductility. Grade 301LN is
another variant. This contains a higher percentage of nitrogen and
exhibits a higher work harden rate compared to standard 301. Only
grade 301 is specified in ASTM A666. 301L and 301LN are represented
by other conventions. Grade 301L is represented by JIS G4305 and
301LN by EN10088-2 as grade 1.4318.
Composition ranges of stainless steel grade 301 are tabulated
Table 1 - Composition ranges for 301 grade stainless steel
The mechanical properties of grade 301 stainless steels are listed
in the table below. The bend test is obtained around a diameter of
the bend factor multiplied by the steel thickness.
Table 2 - Mechanical properties of 301 grade stainless steel
|Grade 301 Temper ASTM A666||Tensile Strength (MPa) min.||Yield Strength 0.2% Proof (MPa) min.||Elongation (% in 50mm) (thick.>0.76mm) min.||Bend Test (thickness > 1.27mm)|
|Bend Angle (°)||Factor|
Some of the typical applications of grade 301 stainless steels are
- Making rail car structural components
- Air frame sections
- Highway trailer components
- Automotive wheel covers
- Wiper blade clips and holders
- Stove element clips
- Screen frames
- Toaster springs
- Curtain walls